Shop By Category

• » Lawn Care
• » Household Solutions
• » Pest Control
• » Vegetable Gardening
• » Home Orchards
• » Flower Garden
• » Trees & Shrubs
• » Tools & Accessories
• » Weed Control

Active Ingredient
spinosad (a mixture of spinosyn A In case of emergency endangering health or the environment
and spinosyn D) ................................. 0.5%  .
Inert Ingredients ...................................99.5%
Total Ingredients ................................. 100.0%

Contains 0.04 pounds of active ingredient per gallon. NET CONTENTS 128 Fl. Oz.
Shake Well Before Use--Avoid Freezing Insect Control Product
 
Environmental Hazards
This product is highly toxic to molluscs. This product is highly toxic to bees exposed to direct spray on blooming crops or other vegetation. Avoid use when bees are actively foraging. Do not apply directly to water.  Do not contaminate water by cleaning of equipment or disposal of equipment washwaters. Do not put product or rinse water down drain.

Directions for Use
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Read all Directions for Use carefully before applying.
For residential use in home gardens, lawn and ornamentals. Not for use on plants being grown for sale or other commercial use, or for commercial seed production, or for research purposes.

Storage and Disposal
Do not contaminate water, food, or feed by storage and disposal.
Storage:  Store in original container only in secure or locked storage area.
Disposal: Securely wrap original container in several layers of newspaper
and discard in trash.Bull’s-Eye BioinsecticideTM, a fermentation-derived insect

control product, is intended for control of worms (caterpillars) and other listed insects.
8758 Label, Bulls-Eye Bioinsecticide - 128 oz., 9-16-04.pmd

Bull’s-Eye BioinsecticideTM, a fermentation-derived insect control product, is intended for control of worms (caterpillars) and other listed insects. Spinosad, the active ingredient in Bull’s-Eye Bioinsecticide does not significantly impact predatory beneficial insects, predatory mites, and spiders while controlling target pests. Susceptible insect pests may be observed on plants up to several hours after treatment, but will have ceased active feeding before being killed.
Mixing and Application  (Shake Well Before Use)

Bull’s-Eye Bioinsecticide may be applied with trigger sprayer, hand-held, backpack, or hose-end sprayers. Use a hose-end sprayer that can be adjusted to provide a dilution ratio of about 2.0 fl. oz. (4 Tbs) of product per gallon of spray.

Add the required amount of Bull’s-Eye Bioinsecticide to the recommended amount of water; mix thoroughly, and apply uniformly to plant foliage to point of runoff.  It is recommended to mix only as much spray as needed for a single treatment. In vegetable gardens it is recommended to use not more than 3.0 gallon of spray for 1,000 sq ft of area. Do not use kitchen utensils for measuring. Keep measuring utensils with product and away from children.
Amount of Bull’s-Eye Bioinsecticide to Use per Pint, Quart or Gallon of Spray

Unit of Measure*	Per Pint Per Quart Per Gallon (16 fl oz) (32 fl oz) (128 fl oz) of Spray of Spray of Spray
Fluid Ounces (fl oz)	0.25 fl oz 0.5 fl oz 2.0 fl oz
Milliliters (ml)	7.5 ml 15 ml 60 ml
Tablespoons (Tbs)	1/2 Tbs 1 Tbs 4 Tbs
Teaspoons (tsp)	1 1/2 tsp 3 tsp  12 tsp

*Conversion factors: 1 fl oz = 30 ml = 2 tablespons (Tbs) = 6 teaspoons (tsp) (1 teaspoon = 1/3 tablespoon)